Size Guide
Size Guide
Tees and hoodies are a unisex cut and come in S through 3XL. The numbers below are garment measurements: the shirt itself, laid flat on a table, not body measurements. That is deliberate: comparing a shirt to a shirt is far more reliable than comparing a shirt to a tape measure around your chest.
Measure a shirt you already own
Find a tee or hoodie you already own and like the fit of, and measure it.
- Lay it flat on a table, front up, and smooth out the wrinkles.
- Chest width: measure straight across from one armpit seam to the other. That single flat measurement is what the tables list, not the distance all the way around your body. If you want to compare it to a body measurement, double it.
- Body length: measure from the highest point of the shoulder seam straight down to the bottom hem.
Match those two numbers to the tables and order that size.
Unisex tees
Heavyweight 100% cotton, unisex fit.
| Size | Chest width (flat) | Body length |
|---|---|---|
| S | 18 | 28 |
| M | 20 | 29 |
| L | 22 | 30 |
| XL | 24 | 31 |
| 2XL | 26 | 32 |
| 3XL | 28 | 33 |
Unisex hoodies
Heavyweight cotton-blend fleece, unisex fit. A hoodie is cut roomier through the chest than a tee in the same nominal size, and shorter in the body.
| Size | Chest width (flat) | Body length |
|---|---|---|
| S | 20 | 27 |
| M | 22 | 28 |
| L | 24 | 29 |
| XL | 26 | 30 |
| 2XL | 28 | 31 |
| 3XL | 30 | 32 |
Between two sizes?
Both the tees and the hoodies are a standard unisex cut that runs true to size, so start with the size the tables point to. From there it is a question of how you want it to sit: take the smaller size for a closer fit, the larger for room to move or to layer over a flannel. Hoodies are usually worn over something else, which is worth a thought before you size down.
What these numbers are, and are not
These are the standard measurements for the class of blank being printed: a heavyweight unisex cotton tee and a heavyweight cotton-blend hooded sweatshirt. They are approximate. Cut-and-sew garments carry a normal manufacturing tolerance of roughly an inch either way on any given measurement, and blanks can vary slightly between production runs.
We have not put a tape measure on the specific piece that will be printed for your order, and we are not going to quote you a spec we cannot stand behind, so treat the tables as a close guide rather than an exact promise. If an inch either way genuinely matters for what you are buying, email scout@liveincda.com before you order and we will tell you what we know.
Everything that is not a tee or hoodie
- Hats and beanies are listed as one size. Color is the only choice to make, and it is on the product page.
- Stickers come in 3″ and 6″ squares.
- Mugs are 11 oz or 15 oz; the tumblers are 20 oz.
- The canvas tote comes in 13″, 16″ and 18″ squares.
- The canvas print comes in 12″, 16″ and 20″ squares, on a 1.25″ deep frame.
Pick the size on the product page before adding to your bag.
Read this before you order
Every item is printed to order for you specifically. Nothing is pre-made, and there is no stock for a wrong-size shirt to go back into, so we cannot accept returns or exchanges because a size did not fit. That is the honest trade-off for made-to-order goods, and it is the single best reason to spend two minutes with a tape measure first.
What we do stand behind: anything that arrives misprinted, damaged, or in a different size or item than what you ordered gets replaced or refunded at no cost to you. The details are on the returns page. And if you are stuck between two sizes, scout@liveincda.com is open before you order.